The brick making equipment uses slag, ore slag, fly ash, stone powder, sand, gravel, cement and other materials as raw materials. Through scientific proportioning, mixing with water and high-pressure pressing, it produces cement bricks, hollow blocks or colored paving bricks. For investors, understanding its core technology and selection points is the first step to successfully enter the building materials industry.【WhatsApp/WeChat/Phone】+86 13837122632
Brick Maker Machine for Sale Parameters
| Block Name | Size (L*W*H)mm | Molding Cycle | QTY/Mould | QTY/hour | Qty/8hr |
| Hollow block | 400*200*200 | 15-20s | 6pcs | 1080-1440pcs | 8640-11520pcs |
| Hollow block | 400*150*200 | 15-20s | 7pcs | 1260-1680pcs | 10080-13440pcs |
| Hollow block | 400*100*200 | 15-20s | 11pcs | 1980-3640pcs | 15840-21120pcs |
| Porous block | 240*115*90 | 15-20s | 15pcs | 2700-3600pcs | 21600-28800pcs |
| Standard brick | 240*115*53 | 15-17s | 30pcs | 6300-7200pcs | 50400-57600pcs |
| Paver | 225*112.5*60 | 20-25s | 15pcs | 2160-2700pcs | 17280-21600pcs |
Working Principle of Brick Making Equipment
Its working principle can be summarized as “mechanical transmission + cyclic pressing”.The main motor drives the reducer through the belt on the pulley, and transmits power to the pinion shaft through the coupling. The pinion drives the big gear to rotate. Through the crank connecting rod mechanism, the circular motion is converted into the up-and-down linear motion of the crossbeam, which then drives the material cart to complete feeding and brick pushing.When the crossbeam rises, the main shaft cam pushes the lower pressure head to eject the pressed products out of the mold cavity. The whole system works in a repeated cycle.
Differences Between Non-Firing Brick Machine and Traditional Firing Brick Machine
Traditional brick firing technology needs a lot of clay, which not only damages farmland, but also causes serious environmental pollution due to coal combustion during production. The advantages of non-firing brick machines are obvious:
- Environmentally friendly and energy-saving: No firing required; products can be delivered after short-time air drying
- Resource recycling: Uses industrial waste such as slag, ore slag, and construction waste
- Higher strength: The strength of cement bricks is much higher than that of traditional red bricks
It is worth mentioning that if you are looking for brick maker machine for sale, most modern models on the market belong to the category of non-firing brick machines.
Automatic Brick Machine vs Semi Auto Brick Making Machine
According to the degree of automation, brick making equipment can be divided into two categories: fully automatic and semi-automatic. The main differences between automatic brick machine and semi auto brick making machine are as follows:
- Control system: Automatic models use PLC computer control, supporting parameter setting, fault diagnosis and remote monitoring; semi-automatic models need more manual intervention
- Production efficiency: the automatic brick machine has a shorter molding cycle
- Labor demand: Automatic brick machine only needs 2–3 operators, while semi-automatic models may need 4–6 workers
- Return on investment: Automatic equipment has higher initial investment, but lower unit labor cost in the long run, suitable for large-scale production
Whether to choose semi auto brick making machine or automatic model depends on your production scale, budget and labor cost.
Technical Comparison: Hydraulic vs Vibration Brick Making Equipment
According to the molding principle, they are mainly divided into mechanical vibration type and hydraulic molding type:
- Hydraulic brick making machine: Adopts hydraulic transmission and vibration pressing. It realizes fast liquefaction and exhaust of concrete through mold table vibration. Features high density, precise size, ideal for high-strength load-bearing blocks.
- Vibration brick making machine: Mainly relies on high-frequency vibration of the vibrating table to form materials. Structure is simple, maintenance cost is low, suitable for producing standard bricks and hollow bricks.
Modern high-end models often use hydraulic + vibration composite technology, ensuring both pressing force and molding efficiency. No matter which principle you choose, it is very important to ensure the equipment has “vibration-pressure separation technology”, which can effectively prevent interference and extend service life.
Multi-Function of Brick Making Equipment
High-quality brick making equipment supports quick mold change. One machine can produce standard bricks, hollow bricks, porous bricks, colored paving bricks, permeable bricks, slope protection bricks and other products. With matching molds, you can flexibly switch brick types to meet market demand, improve equipment utilization and factory profit, truly realizing one machine with multiple functions and one factory with multiple products.
Contact YG Machinery
Investing in brick making equipment is a long-term decision. What you need is not only a machine, but also a partner that can provide stable technical support and after-sales service.YG understands the quality commitment behind every brick. Whether it is automatic or semi-automatic models, we are committed to making every equipment stand the test of time. If you are looking for reliable brick maker machine for sale, or want to know which model suits your production plan, welcome to contact us for detailed solutions and quotations.【WhatsApp/WeChat/Phone】+86 13837122632
