

In the tire recycling industry chain, the rubber shredding machine is the core equipment for the first processing procedure. It is specially designed to cut complete waste tires or large rubber products into uniform small pieces, facilitating subsequent transportation, cleaning, or powder grinding. Unlike ordinary crushers, this rubber shredder adopts a low-speed and high-torque design, which effectively prevents rubber from sticking to blades due to high-temperature melting. If you are planning a tire recycling project, the YG series is a great choice! Feel free to contact us anytime to learn more about product details and the latest tyre shredding machine price!
Tyre Shredding Machine for Sale Parameters
| Model | Power | Spindle Model | Capacity | Broken Size | Hopper Size | Dimensions(mm) |
| YG-600 | 4-15*2 kw | 18-20r/min | 2-3t/h | 3-10cm | 820*900mm | 2600*2000*1900 |
| YG-800 | 4-22*2kw | 18-35r/min | 3-5t/h | 3-10cm | 900*1000mm | 2800*2000*1900 |
| YG-1000 | 4-30*2kw | 18-35r/min | 5-8t/h | 3-10cm | 1200*1000mm | 3000*2000*1900 |
| YG-1200 | 4-37*2kw | 18-35r/min | 6-10t/h | 3-10cm | 1400*1000mm | 3200*2000*1900 |
| YG-1400 | 4-45*2kw | 14-35r/min | 8-12t/h | 3-10cm | 2000*2000mm | 4000*1700*2400 |
| YG-1600 | 4-75*2KW | 14-25r/min | 12-18t/h | 3-10cm | 2300*2000mm | 5000*3000*2400 |
| YG-1900 | 4-90*2kw | 14-25r/min | 16-22t/h | 3-10cm | 2300*2000mm | 6000*3500*2400 |
| YG-2200 | 4-132*2kw | 16-25r/min | 20-26t/h | 3-10cm | 2500*1800mm | 7000*4000*4500 |
| YG-2600 | 4-160*2kw | 16-25r/min | 25-60t/h | 3-10cm | 2425*1400mm | 8200*4000*4300 |

Working Principle of the YG Rubber Shredding Machine
The working principle of the YG series rubber shredding machine can be summarized as “shearing + tearing”. Two cutter shafts are driven by independent motors and reducers to rotate in opposite directions at a low speed. When tires are fed from the hopper, cutter teeth bite into materials and pull them downward, creating an automatic feeding effect. Thanks to the low rotating speed, rubber will not soften or stick due to friction heat. The blades adopt a four-sided rotatable structure with four working surfaces. When one side is worn, it can be rotated by 90 degrees for continuous use, avoiding frequent blade replacement. If you are looking for tyre shredding machine for sale, this working mode means lower maintenance frequency.
Composition of the YG Tire Crusher Machine
A complete rubber shredding machine consists of six core modules that work in coordination: The cutter system (moving and fixed blades) directly cuts materials; the bearing box supports cutter shafts and bears radial impact; the reinforced bracket provides a stable base for the whole machine; the feeding system is equipped with a large-diameter hopper, and models above YG-1400 feature a 2000×2000mm feeding inlet to load whole truck tires; the motor system delivers power with dual-motor drive; the electric control cabinet is fitted with PLC to realize one-click start-stop and fault alarm. In addition, the cutter shafts are made of carbon steel and the blades are made of 9CrSi (SKD-11). These high-quality materials ensure the equipment’s reliability under long-term heavy-load operation.
Advantages of the YG Rubber Shredding Machine
Compared with similar products on the market, the YG series tire crusher machine has obvious strengths in five aspects:
- Direct feeding of large materials: The thickened combined steel frame and large-diameter hopper allow operation without pre-cutting.
- Automatic overload protection: When the PLC detects excessive current, the machine will reverse and re-feed automatically. It will stop and trigger an alarm if two reverses fail, preventing motor burnout.
- Low noise and eco-friendly: Low-speed operation keeps workshop noise below 85 decibels, and it can be matched with a dust removal system.
- Long service life of cutters: Made of special alloy steel, each blade can be reground 3 to 5 times.
- Easy maintenance: The split-type blade design enables single blade replacement in only 20 minutes.
These strengths help YG equipment maintain long-term competitiveness in the tyre shredding machine for sale market, rather than only offering a favorable purchase price.


Applicable Materials of YG Rubber Shredding Machine
Essentially, the YG rubber shredding machine is a multifunctional dual-shaft shredder. It can handle six major categories of materials:
- Rubber products: Car tires, truck tires, engineering tires, rubber hoses, and conveyor belts
- Plastic products: Plastic buckets, pipes, PET bottles, runner materials, and plastic films
- E-waste: Circuit boards, computer casings, and electrical components
- Thin metal materials: Cans, thin iron sheets, and aluminum profiles
- Wood packaging: Wooden pallets, construction formwork, and cartons
- Others: Domestic garbage, medical waste, and industrial scraps
Shredded materials feature a uniform size of 3-10cm, which can be sold directly or sent to the next fine shredding process.
Tyre Shredding Machine for Sale FAQ
Q: How long do blades of the YG tire crusher machine last?
A: For regular tire processing, each regrinding cycle lasts about 600 to 1000 hours. Each blade can be reground 3 to 4 times before replacement.
Q: What is the warranty period for motors and reducers?
A: The whole machine enjoys a one-year warranty.
Q: Can the discharge size be smaller?
A: Yes. By selecting screens with different aperture sizes, the discharge size can be adjusted within 10-50mm. A powder grinder is recommended to be installed after the shredder if ultra-fine powder is needed.
Q: What power configuration does the equipment require?
A: Taking YG-800 as an example, the total power of two motors is 44kW, and a 60A circuit breaker and matched cables are recommended.
Q: How much space is needed to install a rubber shredder?
A: The YG-800 covers an area of about 2.8×2.0 meters. It requires a 1.5-meter maintenance space at the front and rear, plus a 2-meter overhead lifting space.
Q: Is it capable of processing steel wire truck tires?
A: Absolutely. YG series blades with high hardness can easily cut internal steel wires of tires. A magnetic separator is suggested to be installed at the discharge outlet for steel wire separation if the steel wire content is high.



