The Douro Valley in Portugal is famous for its terraced vineyards, and municipal engineering projects around Lisbon keep increasing year after year. In these working scenarios, a flexible and efficient front wheel loader is often the key to solving problems. Whether moving forage in wineries or clearing snow in urban areas, choosing the right machine can greatly boost working efficiency. Below are two practical application cases of the YG front wheel loader in Portugal, which may provide you with some references.
YG Front Wheel Loader Specification Sheet
| Parameter \ Model | 920 | 926 | 928 | 930 | 940 | 946 | 949 |
| Transmission Mode | Mechanical Control | Continuously Variable Transmission | Continuously Variable Transmission | Continuously Variable Transmission | Continuously Variable Transmission | Continuously Variable Transmission | Continuously Variable Transmission |
| Dumping Height (m) | 3.2 | 3.2 | 3.2 | 3.2 | 3.5 | 3.5 | 3.5 |
| Standard Bucket Capacity (cubic meter) | 1.8 | 1.8 | 1.8 | 1.8 | 2 | 2 | 2 or 2.2 |
| Gearbox | High & Low Speed | Model 265 Single High-Low Speed | Model 265 Dual High-Low Speed | Model 265 Dual High-Low Speed | Model 265 Dual High-Low Speed | Model 280 Dual High-Low Speed | Model 300 Split Dual High-Low Speed |
| Drive Axle | Isuzu Axle | Isuzu Axle | Small Planetary Axle | Small Planetary Axle | Heavy-Duty Planetary Axle | Heavy-Duty Planetary Axle | Heavy-Duty Planetary Axle |
| Engine | Weifang 490 | Weifang 490 | Weifang 490 | Weifang 4102 Turbocharged | Weifang 4102 Turbocharged | Weifang 4102 Turbocharged | Weifang 4108 Turbocharged |
| Tire Spec | 20.5-16 | 20.5-16 | 20.5-16 | 20.5-16 | 16/70-20 | 16/70-20 | 16/70-24 |
| Control Lever | Single Lever Operation | Single Lever Operation | Single Lever Operation | Single Lever Operation | Single Lever Operation | Single Lever Operation | Single Lever Operation |
| Braking System | Hydraulic Brake | Hydraulic Brake | Air Brake | Air Brake | Air Brake | Air Brake | Air Brake |
| Hinge Center Distance (cm) | 25 | 25 | 25 | 25 | 30 | 45 | 45 |
Case 1: Feed Transport at Winery in Douro Valley
Client Background
This family-run winery is located in the Douro Valley of northern Portugal, covering an area of about 50 hectares. It grows grain and raises around 80 beef cattle and 200 sheep at the same time. Previously, the winery mainly relied on tractors and manual labor to carry feed and grain. This method was low-efficiency and troubled by labor shortages. During harvest seasons, insufficient workers often caused delays in forage supply.
Client Requirements
The winery faced several practical troubles: narrow internal farm roads with small turning radii; frequent attachment replacement needed to finish different tasks, including grain loading, forage hauling, and manure cleaning; operators were mostly farm workers rather than professional machine operators, so the machine had to be easy to learn and operate; besides, the equipment must not heavily compact the soft soil of vineyards.
YG Solution
We recommended the YG926 front wheel loader for the client. It is equipped with a 1.8-cubic-meter standard bucket for loading grain and sandstone, as well as a grapple attachment for carrying hay bales and straw. The Continuously Variable Transmission (CVT) makes operation as easy as driving an automatic car. The 20.5-16 tires produce low ground pressure and will not easily damage farmland. We also offered a special grain bucket as an optional attachment according to the client’s demands.
Project Process
The client found our website by searching for a construction front loader on Google. During communication, we mainly introduced the easy operation and practical attachment configurations of the machine, explained the operation steps of CVT in detail, and demonstrated the stability of the grapple when lifting hay bales. After comparing technical parameters and multiple phone consultations, the client recognized the machine’s cost performance and matching configuration plan. In the end, the winery owner signed a purchase contract for one YG926, including a standard bucket, grapple attachment, and dedicated grain bucket.
Operation Result
Its loading efficiency is more than 3 times that of traditional tractors. Tasks that once needed four workers, such as forage transport, manure cleaning, and grain loading & unloading, can now all be completed by one person operating front loader construction equipment. The machine has run stably for 8 months with a total working time of over 600 hours without any malfunctions.
Case 2: Multi-scenario Operations for Lisbon Municipal Services
Client Background
A municipal service company in the suburbs of Lisbon takes charge of winter snow removal, construction waste cleaning, and sand transport across three blocks, with around 30 staff members. In the past, it mainly used small tractors and manual snow shoveling, which brought low efficiency and high costs.
Client Requirements
Municipal work covers various scenarios: though winters in Portugal are not extremely cold, mountain roads still have snow for 10 to 15 days every year that need timely clearance. The machine must quickly switch functions between snow removal, construction waste hauling, and park sand transfer. It has to meet emission standards and run at low noise to avoid disturbing local residents.
YG Solution
We supplied the YG930 front end loader, fitted with an efficient snow blower (hydraulically rotatable, 2.2-meter working width) and a 1.8-cubic-meter standard bucket. Heavy-duty planetary axles (two-stage reduction axles) raise ground clearance and impact resistance, adapting to bumpy municipal roads and sharp sundries mixed in construction waste. The air brake system guarantees safe braking when carrying heavy loads downhill. Its engine meets Euro V emission standards, with noise controlled below 75 decibels, lower than local environmental standards.
Project Process
Both sides mainly discussed the rotation angle of the snow blower and the matching of the hydraulic system. We provided the required hydraulic flow parameters for the snow blower and confirmed that the hydraulic system of the YG930 front end loader is fully compatible. After email communication and video conferences, the client was fully satisfied with the machine configuration, price, and after-sales terms, and finally signed a purchase contract for a YG930 front end loader equipped with a snow blower and standard bucket. Three months later, due to business expansion, the company purchased a second front loader construction equipment fitted with a log grapple attachment for garden waste disposal.
Operation Result
This multi-functional construction front end loader removes snow in winter, and is used for sand transport, construction waste, and garden waste cleaning in spring, summer, and autumn. Its annual equipment utilization rate exceeds 85%. Operators said the CVT delivers smooth movement during frequent forward-reverse switching, and single-lever operation greatly reduces work fatigue, allowing comfortable continuous work for 6 hours. According to the calculation of the company owner, each machine can save around 12,000 euros in labor costs every year.
Who Is Front Wheel Loader Suitable For?
- Grain farmers and livestock breeders: Efficiently load grain, carry feed and forage, and clean livestock manure to solve labor shortage problems.
- Sand pits and stone quarries: Rapidly load bulk materials like sand and gravel to improve turnover efficiency.
- Construction sites: Clear construction waste, feed concrete mixers, level ground – one machine for multiple uses.
- Timber mills and port warehouses: Equipped with log grapple attachments to quickly grab and load logs, supporting short-distance transfer of heavy goods.
- Municipal and environmental sanitation departments: Winter snow removal, loading and transfer of sand, muck, and soil, flexibly handling all kinds of loose material operations.
Contact Us
No matter if you run a farm, municipal company, or construction site in Portugal, a properly matched front wheel loader can double your work efficiency with half the effort. We provide full-range models from 920 to 949, with two drive axle options (Isuzu axles and heavy-duty planetary axles) and two transmission choices (mechanical transmission and continuously variable transmission). Custom attachments, including grapples, clamp grabs, bucket forks, and snow blowers, are all available. Our products have obtained international certifications such as CE and EPA. Feel free to contact us if you want more details or a customized solution.
